[Notes] ・ Shipping to Hokkaido and Okinawa is not possible. ・Accessories are limited to those listed in this product description. ・This is a very high-output product, and it generates high heat in a very short time, especially at maximum output. Please use with caution. ・We will include either one Keeppower NH1831 or Eve 30PL battery, for which operation has been confirmed. Please let us know in the comments. This is the red model of Convoy's S2+ flashlight, with a high-output LHP531 1800K emitter. A strap is included. The main specifications are ・Operates with one 18650 lithium-ion rechargeable battery Requires a flat-top 18650 without a protection circuit capable of continuous output of 10A ・ In simple measurement, it is about 2500 lumens at maximum. ・ Reverse click switch (Turn on with a full press, then change output with a half press) It is. The output mode setting of the flashlight can be set from the following 12 groups. Group 1: (0.1%, 1%, 10%, 35%, 100%, Strobe, Bicycle, Battery Check) Group 2: (0.1%, 1%, 10%, 35%, 100%) Group 3: (100%, 35%, 10%, 1%, 0.1%) Group 4: (1%, 20%, 100%, Strobe, Bicycle, Battery Check, SOS) Group 5: (1%, 20%, 100%) Group 6: (100%, 20%, 1%) Group 7: (0.1%, 1%, 10%, 50%, Strobe, Bicycle, Battery Check, SOS) Group 8: (0.1%, 1%, 10%, 50%) Group 9: (50%, 10%, 1%, 0.1%) Group 10: (1%, 10%, 35%, 100%) Group 11: (100%, 20%, strobe) Group 12: (100% only) Mode memory can also be enabled/disabled. Currently, mode memory is enabled in Group 2. When you purchase, we will include a paper with instructions on how to set it up. If you find changing settings troublesome, please let us know and we will send it to you with your desired settings already applied.